SA-Foundry sp. z o.o. offers reliable industrial equipment for crushing and separating various raw materials. We are ready to offer the optimal individual solution for a wide range of tasks for the preparation of raw materials.
0%
SA-Foundry sp. z o.o. offers reliable industrial equipment for crushing and separating various raw materials. We are ready to offer the optimal individual solution for a wide range of tasks for the preparation of raw materials.
High performance double flywheel hammer crushers supplied by SA-Foundry sp. z o.o., allow efficient grinding of raw materials. Designed for a wide range of raw materials (mineral raw materials, agricultural raw materials, non-ferrous scrap, etc.). Each flywheel with removable hammers is driven by its own belt-driven electric motor. The crusher chamber is covered from the inside with armor plates for long-term operation. The crusher chamber volume and crusher capacity are different according to customer requirements.
Single roller crushers supplied by SA-Foundry sp. z o.o. are primary crushers that crush large particles into medium sized particles while producing a minimum amount of very fine dust particles. They are successfully used for crushing various raw materials, for example: coal, mine waste, gypsum, bauxite, various salts, soft shale, etc.
Twin roller crushers are ideal for consumers looking to complete two stages of crushing in a single pass. They can be used in various sectors of the preparation of raw materials, in particular, at coal, salt, lime, coke and potash and other enterprises.
Two roller crushers are especially popular in the agricultural sector for crushing – “flattening” of various grain crops.
Drum crushers SA-Foundry sp. z o.o. are one of the most modern high-performance crushers (grinders) of various raw materials.
Drum crushers most efficiently and reliably solve the problems of sand reclamation at foundries for the production of castings into non-permanent molds. Compared to other equipment, drum crushers (grinders) have the lowest operating costs per ton of sand. They crush, clean, separate, sift and classify coarse sands while automatically discharging waste and debris. Standard models of drum crushers (grinders) allow you to process from 2 to 50 tons of feedstock per hour, either in batches or continuously. It is also possible to install a burner for heating and drying the feedstock.
Drum crushers grind the initial slag of the foundry and metallurgical sites and extract pieces of metal from the slag. This technology allows extracting up to 10-15% additional metal from slags. Drum crushers of this type are equipped with an additional crushing cone with teeth, which ensures efficient crushing of large slag lumps.
Metal recovery and slag utilization are successfully used for the following materials: aluminum alloys, brass, bronze, copper, nickel alloys, steels of various grades, special alloys.
The dynamic crushing cone suspension system directs energy into the material rather than into the machine structure, ensuring a long crusher life.
Screeners supplied by SA-Foundry sp. z o.o., are widely used for the processing of solid minerals, building materials, abrasive materials, some types of plant and other raw materials. Ferrous and non-ferrous metal ores, coal, granite, limestone prevail among the most widespread raw materials.
It is necessary to separate bulk materials by size, which are represented by particles of different sizes, for technical purposes, when it is required to obtain raw materials of a certain size range of lumpy material. Screening operations are usually used in conjunction with crushing (disintegration) processes.
The screening process is mainly used to solve the following tasks:
crushing and classification equipment
SA-Foundry sp. z o.o. is a team of specialists who have many-year experience in the implementation of advanced process solutions for the production of castings and half-finished products from non-ferrous metals and alloys (aluminium, copper, zinc, lead) with improved cast properties.
