Description
SA-FLUX-0107 is a granular flux used for removing
non-metallic inclusions (oxide layers, carbides and
others) and decreasing gas content in cast parts. The
dry and powder-type dross with low metallic content was
obtained after cleaning operation by this flux. The dross
does not stick on furnace lining and crucible surface.
Applications
Cleaning all type of aluminium foundry
alloys for wide range of casting techniques (high
pressure die casting, low pressure die casting, gravity
casting in permanent and sand molds, others). Also for
aluminium foundry alloys preparation.
Method of use
1. In case of aluminium foundry alloys preparation
flux SA-FLUX-0107 introduces in melt stepwise with every
part of batch addition. The finish treatment is
doing before melt pouring.
2. In case of aluminium foundry alloys cleaning
for casting flux SA-FLUX-0107 introduces in melt under rotor
mixing equipment or by hand foundry plunger.
For all applications the temperature of treatment must
be above 680°С.
